Raypak Raytherm 36-110 kW (EH 0133-0400)OUTDOOR/INDOOR GAS BOILERS/WATER HEATERS WITH ATMOSPHERIC BURNERS 36 - 110kW
Typical applications Hydronic heating of buildings Direct heating of domestic hot water Direct heating of swimming pools High temperature technological hot water supply for various industrial processes
BASIC FEATURES Heat exhanger Mangled copper tubesfor extreme strength low hydraulic resistance and high heat-exchange ratio NPT threaded water connectors Glass-lined cast-iron headers and high temperature silicone „O” rings for ferrous free waterways Safety pressure relief valve (up to 9 bar) Controls Two pole separating main switch for the 230V/50Hz incoming power supply. ID electronic ignition. Intermittently operating Pilot light and ionization detection forflame supervision Compact gas valve High temperature limit up to 115°C Operating temperature limit up to 110°C 230 V/50Hz contractor for pump control Flue Gas Spillage Switch (indoor models, up to EH 260) Flame Roll-out Sensor (up to EH 260) Construction Stackless top for outdoor installation drafthood for indoor application Controls are located in the front under the cabinet Stainless steel atmospheric burners Aluminum coated steel plate surfaces with UV resistant sintered finish
OPTIONAL EQUIPMENT Controls Flow switch ECONOMASTERII intermittent pump control and overrun time delay ON/OFF firing Two stage firing
Heat exhanger High abrasion resistant cupro-nickel tubes for hard water conditions in water heaters Bronze headers against electrolytic corrosion and chemical effects in swimming pool heaters
Construction High wind Stack for outdoor installations exposed to regular high winds or downdraught turbulences
Regulation Various constant temperature to weather compensated controllers up to 110°C Collective fault signal and operating status display for building managementsystem
Types of fuel Natural gas LPG gas
Frost protection methods for outdoor installations A mixture of ethylene-glycol/water (same as used for automotive engines) Propylene-glycol/water mix (same as used for solar collectors) Frost protecting thermostat
Installation methods Indoor installation connected to an open vent category B chimney. Outdoor installation without chimney using one of the factory-supplied outdoor tops |
